This customer had a problem. He needed to modify existing vintage switchgear to facilitate a modernization project, which included feeding the switchgear from a new transformer, and upgrading the bus ampacity from 800 to 1600 Amps.

Figure 1: Cable to bus transition cabinet custom manufactured to fit existing vintage low Voltage product.
Figure 1: Cable to bus transition cabinet custom manufactured to fit existing vintage low Voltage product.

This customer had a problem. He needed to modify existing vintage switchgear to facilitate a modernization project, which included feeding the switchgear from a new transformer, and upgrading the bus ampacity from 800 to 1600 Amps.

Impossible cable bending radii, due to low headroom on a concrete slab ceiling, for the new quad 500 M.C.M. cables, required an innovative solution. Custom Control Products made a site visit, took all necessary field measurements, designed, manufactured, installed and commissioned a cable entry section. One purchase order allowed no hand offs or confusion of responsibilities.

Posted ON Fri, April 30, 2021 at 2:21:37 pm MDT    Comments (0)
No Comments.
Add Comment
*Name:
Url:     http://
*Comments:
*Verify:
verify
* Required Fields
Version 5.3
Site Map | Login | Powered By: Techweavers Inc.